California Swingset Parts
Commercial Master Parts List
California Swingset Parts offers you top quality replacement swing parts and components for your commercial playground. Commercial swing seats, swing hangers, swing chains, and other swing parts ... whatever you need, we've got it. They're all made in the USA. Below you'll find our complete list of commercial swingset parts. If you have any questions, just phone us toll free! We also sell a full line of playground equipment.
The diagram at right shows the names of the swing
parts you'll need for your commercial swingset.
|
|
|
Commercial
Swing Hangers
These swing hangers attach to the play structure, and you hang swing chains from them. These hangers are heavy-duty cast ductile iron, with Oilite bronze bushings. You will need two hangers for each swing (one per chain). To attach swing chains to the swing hanger, you will need fasteners (see below), except for the E-Z Hang models, which have a built-in pendulum with an opening mechanism. |
 Iron Swing Hanger
For commercial wooden beam.
Fastens with 2 hex bolts.
$13.50 (#SH-04) |
 EZ-Hang (Bolt-On)
NEW! For commercial wooden beam. Fastens with 1 carriage bolt. Built-in steel shackle pendulum.
$13.45 (#SH-108)
|
 Steel Swing Hanger
For commercial wood beam. Fastens with 1 carriage bolt.
$11.50 (#SH-107)
|
 E-Z Hang (Clamp Fitting)
For horizontal pipes. The built-in clevis makes H-shackles and S-hooks obsolete!
2-3/8"
diameter
$19.50 each (#SH-05)
3-1/2" (#SH-06)
$23.50 each (# SH-06)
|
|
 NEW! Non-Wrap
Swing E-Z Hanger
The hanger shifts within the rubber sleeve, so kids can't adjust swing heights by looping them over the horizontal bar. Diameters available:
• 2-3/8" $54.99 #SH-116
• 3-1/2" $65.99 #SH-126 |
|
Commercial
Tire Swing Hangers & Hardware
These modern tires are made from hollow, roto-molded plastic, so they're lightweight yet tough. The tires don't come with chains or swing fasteners, unless otherwise stated. To connect the swing chain to the tire and to the swing hanger on the structure, you'll need fasteners (see below). |
|
Molded
Plastic Tire Swing
Tough, yet lightweight, this tire is made from hollow plastic. The eye-bolts are built in.
$99.00 (Part# A-155) |
|
Heavy
Duty
Tire Swing Hanger
For use with wooden horizontal beams on commercial structures.
$128.00 (Part# SH-29)
|
Extra
Heavy Duty Tire Swing Hanger
with Top Plate
For use with wooden beams on commercial structures.
$155.00 (Part# SH-01) |
Extra
Heavy Duty Tire Swing Hanger with Pipe Swivel (SH08)
For use with horizontal pipes on commercial structures.Diameters:
2-3/8", 3-1/2",
or 5".
$159.00 ALL SIZES
(Part# SH-50/51/52) |
|
Commercial
Swing Chain Fasteners and Connectors
These fasteners and connectors are used for 2 purposes: attaching swingseats to chains, and attaching the top of the chains to the swing hangers on the structure. There are 3 options: H-Shackles, Clevises, or S-Hooks. We recommend H-Shackles, which need only the special Allen Wrench tool to open and close (but S-Hooks require a pair of S-Hook Pliers, which can be pricey.) |
H-Shackle
Opens on both ends. Requires special Allen wrench tool (T01).
$4.75 each (#H172) |
Clevis
Opens on one end. Requires special Allen Wrench tool.
$4.50 each (#SH-40) |
Allen Wrench
Opens and closes Clevises and H-Shackles. Its unique design has a hole in the middle of the face, making it diferent from regular Allen wrenches
$1.99 each (#T-01)
|
S-Hook 3/8"
Connect your chains &
swing hangers. S-Hook Pliers needed.
$2.00 (#H-04)
|
S-Hook Pliers
This tool opens and
closes S-Hooks.
$149.00 (#A-04) |
|
|
|
Commercial
Swing Seats :: MADE IN THE 
The playground standard. Many colors.
Pipe Swing Hanger